The AM series is a professional digital audio processing module based on digital signal processing technology, with 2 inputs and 4 outputs. This processing module uses ARM processors in conjunction with embedded operating systems, fully digital ADI algorithms, and debugging systems to achieve beautiful sound effects and a simple and intuitive debugging method. It can also modify a specific frequency point on music or vocals.
Each input channel of the AM series has three audio processing modules such as parameter equalization and noise gate, which can finely modify and compensate for the characteristics of the speaker, making the sound reinforcement system better adapt to the acoustic characteristics of the building environment; Each output channel has 10 segments of parameter equalization, ALLPASS all pass filter, high and low pass filter, compressor, and limiter, which can limit the output signal size and avoid long-term overload of downstream equipment, better protecting the amplifier and speaker.
Functional characteristics
● Two balanced channel inputs, four single channel outputs, external GPIO expansion
● 24-BT, AD/DA, 96KHZ sampling rate
● ARM processor with embedded operating system, external expansion of ADIAUDIO DSP
● Each channel at the input end has noise gates, gain, phase, mute, delay, and 3-stage parameter equalization, and an ALLPASS all pass filter
● Each channel at the output end has high and low pass filters, delay, phase, mute, voltage limiter, and I0 segment parameter balanced ALLPASS all pass filtering
● Each output has an independent voltage limiter, and its start time, release time, and threshold can be adjusted over a wide range
● High and low pass filters with multiple choices of slope and type (BUTTERWORTH, LINKWITZ-RLEY, BESSEL): -6, -12DB, -18DB, -24DB, -24DB, frequency division adjustable at any frequency point in the audio range
● Each output has an independent delay controller, with a maximum delay time of 25MS (sampling rate of 96K)
Model | AM200 | AM300 | AM400 | AM600 | AM800 | AM1200 | AM1400 |
Channel | 2 Channel | 2 Channel | 2 Channel | 2 Channel | 2 Channel | 1Channel | 1Channel |
Stereo 8 Ohm | 200Wx2 | 300Wx2 | 400Wx2 | 600Wx2 | 800Wx2 | 1200Wx1 | 1800Wx1 |
4 Ohm | 300Wx2 | 450Wx2 | 600Wx2 | 900Wx2 | 1200Wx2 | / | / |
Bridged 8Ohm | 600W | 900W | 1200W | 1800W | 2400W | / | / |
DSP switch | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Number of level network ports | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Power supply type | Class D | Class D | Class D | Class D | Class D | Class D | Class D |
Working voltage | 110-250V | 110-250V | 110-250V | 110-250V | 110-250V | 110-250V | 110-250V |
Input board | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female | 2-way XLR male 2-way XLR female |
Output board | 1 cable output | 1 cable output | 1 cable output | 1 cable output | 1 cable output | 1 cable output | 1 cable output |
Max Output Voltage | 74V | 85.3V | 100V | 122V | 122V | 173V | 187V |
Voltage Gain(0.77v/odB) | x56 | x62 | x73 | x89 | x89 | x126 | x37 |
Typical Music | 300VA | 380VA | 500VA | 750VA | 750VA | 1500VA | 1750VA |
Power Cur.Draw | 1.3A | 1.65A | 2.2A | 3.3A | 3.3A | 6.5A | 7.6A |
Over Loading | 600VA | 760VA | 1000VA | 1500VA | 1500VA | 3000VA | 3500VA |
Over Cur.Draw | 2.6A | 3.3A | 4.3A | 6.5A | 6.5A | 13.0A | 15.2A |
Size | 160x310mm | 160x310mm | 160x310mm | 160x310mm | 160x310mm | 160x310mm | 160x310mm |
Net Weight | 2.5Kg | 2.7Kg | 2.9Kg | 3Kg | 3.2Kg | 5Kg | 15.2Kg |